Products

Features for the WL1807MOD

General

• Integrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power management
• Quick hardware design with TI module collateral and reference designs
• Operating temperature: –40°C to +85°C industrial temperature grade
• Small form factor: 13.3 × 13.4 × 2 mm
• 100-pin MOC package
• FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas

Wi-Fi

• WLAN baseband processor and RF transceiver support of IEEE Std 802.11a, 802.11b, 802.11g, and 802.11n
• 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)
• 2.4-GHz MRC support for extended range and 5-GHz diversity capable
• Fully calibrated: production calibration not required
• 4-bit SDIO host interface support
• Wi-Fi direct concurrent operation (multichannel, multirole)

Bluetooth and Bluetooth low energy ( WL1837MOD only)

• Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D052427 )
• Host controller interface (HCI) transport for Bluetooth over UART
• Dedicated audio processor support of SBC encoding + A2DP
• Dual-mode Bluetooth and Bluetooth low energy
• TI’s Bluetooth and Bluetooth low energy certified stack

Key benefits

• Reduces design overhead
• Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
• Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
• Different provisioning methods for in-home devices connectivity to Wi-Fi in one step
• Lowest Wi-Fi power consumption in connected idle (< 800 µA)
• Configurable wake on WLAN filters to only wake up the system
• Wi-Fi and Bluetooth single antenna coexistence

Description for the WL1807MOD

The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi^® and Bluetooth^® coexistence (WL1837MOD only) in a power-optimized design. The WL18x7MOD is a Wi-Fi, dual-band, 2.4- and 5-GHz module solution with two antennas supporting industrial temperature grade. The device is FCC, IC, ETSI/CE, and TELEC certified for AP (with DFS support) and client. TI offers drivers for high-level operating systems, such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.

1. Who are the staff in your R & D department? What are your qualifications?

-R & D Director: formulate the company’s long-term R & D plan and grasp the direction of research and development; Guide and supervise r&d department to implement company r&d strategy and annual R&D plan; Control the progress of product development and adjust the plan; Set up excellent product research and development team, audit and training related technical personnel.

R & D Manager: make new product R & D plan and demonstrate the feasibility of the plan; Supervise and manage the progress and quality of r&d work; Research new product development and propose effective solutions according to customer requirements in different fields

R&d staff: collect and sort out key data; Computer programming; Conducting experiments, tests and analyses; Prepare materials and equipment for experiments, tests and analyses; Record measurement data, make calculations and prepare charts; Conduct statistical surveys

2. What is your product research and development idea?

- Product conception and selection product concept and evaluation product definition and project plan design and development product testing and validation launch to market