Globalization concept

Products

Factory Cheap Hot Mosfet And Igbt - WL1807MODGIMOCR – FlyBird

Short Description:


Product Detail

Research

Product Tags

Related Video

Feedback (2)

We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way for 20mhz Crystal , Electrical Components Distributor , OP07-DP , In addition, we would properly guide the customers about the application techniques to adopt our products and the way to select appropriate materials.
Factory Cheap Hot Mosfet And Igbt - WL1807MODGIMOCR – FlyBird Detail:

Features for the WL1807MOD

General

  • Integrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power management
  • Quick hardware design with TI module collateral and reference designs
  • Operating temperature: –40°C to +85°C industrial temperature grade
  • Small form factor: 13.3 × 13.4 × 2 mm
  • 100-pin MOC package
  • FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas

Wi-Fi

  • WLAN baseband processor and RF transceiver support of IEEE Std 802.11a, 802.11b, 802.11g, and 802.11n
  • 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)
  • 2.4-GHz MRC support for extended range and 5-GHz diversity capable
  • Fully calibrated: production calibration not required
  • 4-bit SDIO host interface support
  • Wi-Fi direct concurrent operation (multichannel, multirole)

Bluetooth and Bluetooth low energy ( WL1837MOD only)

  • Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D052427 )
  • Host controller interface (HCI) transport for Bluetooth over UART
  • Dedicated audio processor support of SBC encoding + A2DP
  • Dual-mode Bluetooth and Bluetooth low energy
  • TI’s Bluetooth and Bluetooth low energy certified stack

Key benefits

  • Reduces design overhead
  • Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
  • Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
  • Different provisioning methods for in-home devices connectivity to Wi-Fi in one step
  • Lowest Wi-Fi power consumption in connected idle (< 800 µA)
  • Configurable wake on WLAN filters to only wake up the system
  • Wi-Fi and Bluetooth single antenna coexistence

Description for the WL1807MOD

The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi® and Bluetooth® coexistence (WL1837MOD only) in a power-optimized design. The WL18x7MOD is a Wi-Fi, dual-band, 2.4- and 5-GHz module solution with two antennas supporting industrial temperature grade. The device is FCC, IC, ETSI/CE, and TELEC certified for AP (with DFS support) and client. TI offers drivers for high-level operating systems, such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.


Product detail pictures:

Factory Cheap Hot Mosfet And Igbt - WL1807MODGIMOCR – FlyBird detail pictures


Related Product Guide:

The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Factory Cheap Hot Mosfet And Igbt - WL1807MODGIMOCR – FlyBird , The product will supply to all over the world, such as: Birmingham, Qatar, Slovenia, Our product quality is one of the major concerns and has been produced to meet the customer's standards. "Customer services and relationship" is another important area which we understand good communication and relationships with our customers is the most significant power to run it as a long term business.

1. Who are the staff in your R & D department? What are your qualifications?

-R & D Director: formulate the company’s long-term R & D plan and grasp the direction of research and development; Guide and supervise r&d department to implement company r&d strategy and annual R&D plan; Control the progress of product development and adjust the plan; Set up excellent product research and development team, audit and training related technical personnel.

R & D Manager: make new product R & D plan and demonstrate the feasibility of the plan; Supervise and manage the progress and quality of r&d work; Research new product development and propose effective solutions according to customer requirements in different fields

R&d staff: collect and sort out key data; Computer programming; Conducting experiments, tests and analyses; Prepare materials and equipment for experiments, tests and analyses; Record measurement data, make calculations and prepare charts; Conduct statistical surveys

 

2. What is your product research and development idea?

- Product conception and selection product concept and evaluation product definition and project plan design and development product testing and validation launch to market

  • In our cooperated wholesalers, this company has the best quality and reasonable price, they are our first choice.
    5 Stars By Deirdre from USA - 2018.11.28 16:25
    We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
    5 Stars By Nelly from Morocco - 2018.12.11 14:13
    Write your message here and send it to us

    Our advantages lie in the following trade lanes: