Products

Features for the CC2520

●APPLICATIONS

○IEEE 802.15.4 systems

○ZigBee® systems

○Industrial monitoring and control

○Home and building automation

○Automatic Meter Reading

○Low-power wireless sensor networks

○Set-top boxes and remote controls

○Consumer electronics

●KEY FEATURES

○State-of-the-art selectivity/co-existence

○Adjacent channel rejection: 49 dB

○Alternate channel rejection: 54 dB

○Excellent link budget (103dB)

○400 m Line-of-sight range

○Extended temp range (–40 to +125°C)

○Wide supply range: 1.8 V – 3.8 V

○Extensive IEEE 802.15.4 MAC hardware

○support to offload the microcontroller

○AES-128 security module

○CC2420 interface compatibility mode

●Low Power

○RX (receiving frame, –50 dBm) 18.5 mA

○TX 33.6 mA @ +5 dBm

○TX 25.8 mA @ 0 dBm

○<1µA in power down

●General

○Clock output for single crystal systems

○RoHS compliant 5 × 5 mm QFN28 (RHD) package

●Radio

○IEEE 802.15.4 compliant DSSS baseband modem with 250 kbps data rate

○Excellent receiver sensitivity (–98 dBm)

○Programmable output power up to +5 dBm

○RF frequency range 2394-2507 MHz

○Suitable for systems targeting compliance with worldwide radio frequency  regulations: ETSI EN 300 328 and EN 300 440 class 2 (Europe),

○FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan)

●Microcontroller Support

○Digital RSSI/LQI support

○Automatic clear channel assessment for CSMA/CA

○Automatic CRC

○768 bytes RAM for flexible buffering and security processing

○Fully supported MAC security

○4 wire SPI

○6 configurable IO pins

○Interrupt generator

○Frame filtering and processing engine

○Random number generator

●Development Tools

○Reference design

○IEEE 802.15.4 MAC software

○ZigBee® stack software

○Fully equipped development kit

○Packet sniffer support in hardware

ZigBee® is a registered trademark owned by ZigBee Alliance, Inc.

Description for the CC2520

The CC2520 is TI’s second generation ZigBee®/ IEEE 802.15.4 RF transceiver for the 2.4 GHz unlicensed ISM band. This chip enables industrial grade applications by offering state-of-the-art selectivity/co-existence, excellent link budget, operation up to 125°C and low voltage operation.

In addition, the CC2520 provides extensive hardware support for frame handling, data buffering, burst transmissions, data encryption, data authentication, clear channel assessment, link quality indication and frame timing information. These features reduce the load on the host controller.

In a typical system, the CC2520 will be used together with a microcontroller and a few additional passive components.

1. Who are the staff in your R & D department? What are your qualifications?

-R & D Director: formulate the company’s long-term R & D plan and grasp the direction of research and development; Guide and supervise r&d department to implement company r&d strategy and annual R&D plan; Control the progress of product development and adjust the plan; Set up excellent product research and development team, audit and training related technical personnel.

R & D Manager: make new product R & D plan and demonstrate the feasibility of the plan; Supervise and manage the progress and quality of r&d work; Research new product development and propose effective solutions according to customer requirements in different fields

R&d staff: collect and sort out key data; Computer programming; Conducting experiments, tests and analyses; Prepare materials and equipment for experiments, tests and analyses; Record measurement data, make calculations and prepare charts; Conduct statistical surveys

2. What is your product research and development idea?

- Product conception and selection product concept and evaluation product definition and project plan design and development product testing and validation launch to market