-
TLV2211CDBVR with high output current (10 mA)
TLV2211CDBVR Single, 10-V, 65-kHz operational amplifier with high output current (10 mA)
The TLV2211 is a single low-voltage operational amplifier available in the SOT-23 package. It consumes only 11 µA (typ) of supply current and is ideal for battery-power applications. The TLV2211 has a 3-V noise level of 22 nV/Hz at 1kHz; 5 times lower than competitive SOT-23 micropower solutions. The device exhibits rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV2211 is fully characterized at 3 V and 5 V and is optimized for low-voltage applications.
The TLV2211, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs).
-
TLV272CDGKR MSOP-8 Electronic components integrated circuit 3MHz Amplifier chip
TLV272CDGKR Dual, 16-V, 3-MHz operational amplifier
Operating from 2.7 V to 16 V over the extended industrial temperature range from –40°C to +125°C, the TLV27x is a low power, wide bandwidth operational amplifier (opamp) with rail to rail output. This makes it an ideal alternative to the TLC27x family for applications where rail-to-rail output swings are essential. The TLV27x provides 3-MHz bandwidth from only 550 µA.
Like the TLC27x, the TLV27x is fully specified for 5-V and ±5-V supplies. The maximum recommended supply voltage is 16 V, which allows the devices to be operated from a variety of rechargeable cells (±8 V supplies down to ±1.35 V).
The CMOS inputs enable use in high-impedance sensor interfaces, with the lower voltage operation making an attractive alternative for the TLC27x in battery-powered applications.
All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package.
The 2.7-V operation makes it compatible with Li-Ion powered systems and the operating supply voltage range of many micropower microcontrollers available today including TI’s MSP430.
-
OPA2196IDGKR MSOP-8 Electronic components integrated circuit Operational amplifier
OPA2196IDGKR
ACTIVE
Dual, 36-V, low power, all-purpose amplifier with mux-friendly inputThe OPAx196 family (OPA196, OPA2196, and OPA4196) is a new generation of 36-V,rail-to-rail e-trim™ operational amplifiers (op amps).
These devices offer very low offset voltage (±25 µV, typical), drift (±0.5 µV/°C,typical), and low bias current (±5 pA, typical) combined with very low quiescent current (140µA/channel, typical) across the entire output range.
Unique features, such as differential input-voltage range to the supply rail, high outputcurrent (±65 mA), and high capacitive load drive of up to 1 nF make the OPAx196 a robust,high-performance operational amplifier for high-voltage industrial applications.
The OPAx196 family of op amps is available in standard packages and is specified from–40°C to +125°C.
-
TAS5760MDAPR HTSSOP-32 Electronic components integrated circuit Audio amplifier
TAS5760MDAPR
ACTIVE
55-W stereo, 114-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifierThe TAS5760M is astereo I2S input device which includes hardware andsoftware (I²C) control modes, integrateddigital clipper, severalgain options, and a wide power supply operating range to enable use in a multitude of applications.The TAS5760M operates with a nominal supply voltage from 4.5 to24 VDC.
An optimal mix of thermal performance and device cost is provided in the120-mΩ RDS(ON) of the output MOSFETs. Additionally, a thermally enhanced48-Pin TSSOP providesexcellent operation in the elevated ambient temperatures found in modern consumer electronicdevices.
The entire TAS5760xx family ispin-to-pin compatible in the 48-Pin TSSOP package.Alternatively, to achieve thesmallest possible solutions size for applications where pin-to-pin compatibility and a headphone orline driver are not required, a 32-Pin TSSOP package is offered for the TAS5760M and TAS5760Ldevices. The I2C register map in all of the TAS5760xx devices areidentical, to ensure low development overhead when choosing between devices based upon system-levelrequirements.
-
OPA4322AIPWR Quad, 5.5-V, 20-MHz
OPA4322AIPWR Quad, 5.5-V, 20-MHz, 65-mA output current, low noise (8.5-nV/√Hz), RRIO operational amplifier
-
OPA4377AIPWR Quad low-cost, low-noise
OPA4377AIPWR
Quad low-cost, low-noise, 5.5-MHz CMOS operational amplifier -
LT1013DIDR Low power
LT1013DIDR
Low power, 5V – 44V wide supply range, dual precision operational amplifier -
TLV2471IDBVR
TLV2471IDBVR Single, 6-V, 2.8-MHz, RRIO operational amplifier
