-
DS1100U-250/T&R
Documents & Media Datasheets DS1100U-250/T&R Product Attributes Available Total Delays : 250ns Delay to 1st Tap : 50ns Function : Nonprogrammable Mounting Type : Surface Mount Number of Independent Delays : 1 Number of Taps/Steps : 5 Operating Temperature : -40 -
DS1100U-40/T&R
Documents & Media Datasheets DS1100U-40/T&R Product Attributes Available Total Delays : 40ns Delay to 1st Tap : 8ns Function : Nonprogrammable Mounting Type : Surface Mount Number of Independent Delays : 1 Number of Taps/Steps : 5 Operating Temperature : -40 -
DS1100U-175/T&R
Documents & Media Datasheets DS1100U-175/T&R Product Attributes Available Total Delays : 175ns Delay to 1st Tap : 35ns Function : Nonprogrammable Mounting Type : Surface Mount Number of Independent Delays : 1 Number of Taps/Steps : 5 Operating Temperature : -40 -
DS1100U-60/T&R
Documents & Media Datasheets DS1100U-60/T&R Product Attributes Available Total Delays : 60ns Delay to 1st Tap : 12ns Function : Nonprogrammable Mounting Type : Surface Mount Number of Independent Delays : 1 Number of Taps/Steps : 5 Operating Temperature : -40°C ~ 85°C Package / Case : 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Packaging : Tape & Reel (TR) Part Status : Obsolete Series : - Supplier Device Package : 8-uMAX Tap Increment : 1... -
LMZ31520RLGT compatible with standard QFN mounting and testing techniques.
LMZ31520RLGT 3V to 14.5V, 20A Step-Down Power Module in 15x16x5.8mm QFN Package
The LMZ31520 power module is an easy-to-use integrated power solution that combines a20-A DC/DC converter with power MOSFETs, a shielded inductor, and passives into a low profile, QFNpackage. This total power solution allows as few as three external components and eliminates theloop compensation and magnetics part selection process.
The 15×16×5.8 mm QFN package is easy to solder onto a printed circuit board and allows acompact point-of-load design. Achieves greater than 95% efficiency, has ultra-fast load stepresponse and excellent power dissipation capability with a thermal impedance of 8.6°C/W. TheLMZ31520 offers the flexibility and the feature-set of a discrete point-of-load design and is idealfor powering a wide range of ICs and systems. Advanced packaging technology affords a robust andreliable power solution compatible with standard QFN mounting and testing techniques.
-
TPS53219ARGTR small-sized single buck controller
TPS53219ARGTR 3-V to 28-V, 20-A, synchronous D-CAP buck controller with Eco Mode
The TPS53219A device is a small-sized single buck controller with adaptive ON-time D-CAPmode control. The device is suitable for low output voltage, high current, PC system power rail andsimilar point-of-load (POL) power supplies in digital consumer products. The small package andminimal pin-count save space on the PCB, while the dedicated EN pin and pre-set frequencyselections simplify the power supply design. The skip mode at light load conditions, strong gatedrivers, and low-side FET RDS(on) current sensing supports low-loss and highefficiency, over a broad load range. The conversion input voltage (high-side FET drain voltage)range is between 4.5 V and 25 V, and the output voltage range is between 0.6 V and 5.5 V. TheTPS53219A is available in a 16-pin, QFN package specified from –40°C to +85°C.
-
TLV70728PDQNR 200-mA
TLV70728PDQNR 200-mA, low-IQ, low-dropout voltage regulator with enable & active output discharge
The TLV707 series (TLV707 and TLV707P) of low-dropout linear regulators (LDOs) are lowquiescent current devices with excellent line and load transient performance for power-sensitiveapplications. These devices provide a typical accuracy of 0.5%. All versions have thermal shutdownand overcurrent protection for safety.
Furthermore, these devices are stable with an effective output capacitance of only 0.1µF. This feature enables the use of cost-effective capacitors that have higher bias voltages andtemperature derating. These devices also regulate to the specified accuracy with no outputload.
The TLV707P also provides an active pulldown circuit to quickly discharge theoutputs.
The TLV707 series of LDOs are available in a 1-mm × 1-mm DQN (X2SON) package that makesthem desirable for handheld applications.
-
CC2520RHDR second generation 2.4 GHz ZigBee/IEEE 802.15.4 wireless transceiver
The CC2520 is TI’s second generation ZigBee®/ IEEE 802.15.4 RF transceiver for the 2.4 GHz unlicensed ISM band. This chip enables industrial grade applications by offering state-of-the-art selectivity/co-existence, excellent link budget, operation up to 125°C and low voltage operation.
In addition, the CC2520 provides extensive hardware support for frame handling, data buffering, burst transmissions, data encryption, data authentication, clear channel assessment, link quality indication and frame timing information. These features reduce the load on the host controller.
In a typical system, the CC2520 will be used together with a microcontroller and a few additional passive components.
-
TPS62180YZFR 4-V to 15-V
TPS62180YZFR 4-V to 15-V, 6-A synchronous buck converter with power good, 1% accuracy, and adjustable soft start
The TPS6218x is a synchronous dual-phase step-down DC-DC converter for low profile powerrails. It operates with two identical, current balanced phases that are peak current controlledenabling use in height limited applications.
With a wide operating input voltage range of 4 V to 15 V, the device is ideally suitedfor systems powered from multi-cell Li-Ion batteries or 12-V rails. The output current of 6 A iscontinuously provided by two phases of 3 A each, allowing the use of low profile externalcomponents. The phases operate out of phase, reducing switching noise significantly.
The TPS6218x automatically enters Power Save Mode to maintain high efficiency down tovery light loads. It also incorporates an AutomaticEfficiency Enhancement(AEE™) for theentire duty cycle range.
The device features a Power Good signal, as well as an adjustable soft start. Thequiescent current is typically 28 µA, it is able to run in 100% mode, and it has no duty cyclelimitation even at lowest output voltage.
The TPS6218x, available in adjustable and fixed output voltage options, is packaged in asmall 24-bump, 0.5 mm pitch DSBGA package.
-
TLV2211CDBVR with high output current (10 mA)
TLV2211CDBVR Single, 10-V, 65-kHz operational amplifier with high output current (10 mA)
The TLV2211 is a single low-voltage operational amplifier available in the SOT-23 package. It consumes only 11 µA (typ) of supply current and is ideal for battery-power applications. The TLV2211 has a 3-V noise level of 22 nV/Hz at 1kHz; 5 times lower than competitive SOT-23 micropower solutions. The device exhibits rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV2211 is fully characterized at 3 V and 5 V and is optimized for low-voltage applications.
The TLV2211, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs).
-
TPS259573DSGR 2.7-V to 18-V with over voltage protection
TPS259573DSGR 2.7-V to 18-V, 34mΩ, 0.5-4A eFuse with over voltage protection in small WSON package
The TPS2595xx family of eFuses (integrated FET hot swap devices) is a highly integratedcircuit protection and power management solution in a small package. The devices provide multipleprotection modes using very few external components and are a robust defense against overloads,short circuits, voltage surges, and excessive inrush current.
Output current limit level can be set with a single external resistor. It is alsopossible to get an accurate sense of the output load current by measuring the voltage drop acrossthe current limit resistor. Applications with particular inrush current requirements can set theoutput slew rate with a single external capacitor. Overvoltage events are quickly limited byinternal clamping circuits to a safe fixed maximum, with no external components required. TheTPS259573 variant provides an option to set a user-defined overvoltage cutoff threshold.
Quick output discharge function can be implemented in the TPS2595x5 variants byconnecting the OUT pin to the QOD pin.
The devices are characterized for operation over the temperature range of –40°C to+125°C.
-
TPS54560BQDDARQ1 SOP-8 Electronic components integrated circuit Voltage regulator
TPS54560BQDDARQ1
ACTIVE
4.5V to 60V Input, 5A, Step-Down DC-DC Converter with Eco-mode™The TPS54560B-Q1 is a 60 V, 5 A, step down regulator with an integrated high side MOSFET. The device survives load dump pulses up to 65V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no load supply current to 146 µA. Shutdown supply current is reduced to 2 µA when the enable pin is pulled low.
Undervoltage lockout is internally set at 4.3 V but can be increased using the enable pin. The output voltage start up ramp is internally controlled to provide a controlled start up and eliminate overshoot.
A wide switching frequency range allows either efficiency or external component size to be optimized. Output current is limited cycle-by-cycle. Frequency foldback and thermal shutdown protects internal and external components during an overload condition.
The TPS54560B-Q1 is available in an 8-terminal thermally enhanced HSOP PowerPAD™ package.
