Globalization concept

Products

TCA9555RTWR QFN-24 Electronic components integrated circuit 1.65V-5.5V 400kHz

Short Description:

TCA9555RTWR
ACTIVE
16-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, weak pull-up & config registers

This 16-bit I/O expander for the two-line bidirectional bus(I2C) is designed for 1.65-V to 5.5-V VCCoperation. It provides general-purpose remote I/O expansion for most microcontroller families viathe I2C interface.

The TCA9555 consists of two 8-bit Configuration (input or output selection), Input Port,Output Port, and Polarity Inversion (active high or active low operation) registers. At power on,the I/Os are configured as inputs. The system master can enable the I/Os as either inputs oroutputs by writing to the I/O configuration bits. The data for each input or output is kept in thecorresponding Input or Output register. The polarity of the Input Port register can be invertedwith the Polarity Inversion register.

The TCA9555 is identical to the TCA9535, except for the inclusion of the internalI/O pull-up resistor, which pulls the I/O to a default high when configured as an input andundriven.

Three hardware pins (A0, A1, and A2) are used to program theI2C address, which allows up to eight TCA9555 devices to share the sameI2C bus or SMBus. The fixed I2C address ofthe TCA9555 is the same as the PCF8575,PCF8575C, andPCF8574, allowing up to eight of thesedevices in any combination to share the same I2C bus or SMBus.


Product Detail

Research

Product Tags

Features for the TCA9555

●Low Standby-Current Consumption of 3.5 µA Maximum

I2C to Parallel Port Expander
Open-Drain Active-Low Interrupt Output
5-V Tolerant I/O Ports
Compatible With Most Microcontrollers
400-kHz Fast I2C Bus
Configurable Slave Address with 3 Address Pins
Polarity Inversion Register
Latched Outputs With High-Current Drive Capability for Directly Driving LEDs
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22

○2000-V Human-Body Model (A114-A)

○1000-V Charged-Device Model (C101)

Description for the TCA9555

This 16-bit I/O expander for the two-line bidirectional bus(I2C) is designed for 1.65-V to 5.5-V VCCoperation. It provides general-purpose remote I/O expansion for most microcontroller families viathe I2C interface.

The TCA9555 consists of two 8-bit Configuration (input or output selection), Input Port,Output Port, and Polarity Inversion (active high or active low operation) registers. At power on,the I/Os are configured as inputs. The system master can enable the I/Os as either inputs oroutputs by writing to the I/O configuration bits. The data for each input or output is kept in thecorresponding Input or Output register. The polarity of the Input Port register can be invertedwith the Polarity Inversion register.

The TCA9555 is identical to the TCA9535, except for the inclusion of the internalI/O pull-up resistor, which pulls the I/O to a default high when configured as an input andundriven.

Three hardware pins (A0, A1, and A2) are used to program theI2C address, which allows up to eight TCA9555 devices to share the sameI2C bus or SMBus. The fixed I2C address ofthe TCA9555 is the same as the PCF8575,PCF8575C, andPCF8574, allowing up to eight of thesedevices in any combination to share the same I2C bus or SMBus.


  • Previous:
  • Next:

  • 1. Who are the staff in your R & D department? What are your qualifications?

    -R & D Director: formulate the company’s long-term R & D plan and grasp the direction of research and development; Guide and supervise r&d department to implement company r&d strategy and annual R&D plan; Control the progress of product development and adjust the plan; Set up excellent product research and development team, audit and training related technical personnel.

    R & D Manager: make new product R & D plan and demonstrate the feasibility of the plan; Supervise and manage the progress and quality of r&d work; Research new product development and propose effective solutions according to customer requirements in different fields

    R&d staff: collect and sort out key data; Computer programming; Conducting experiments, tests and analyses; Prepare materials and equipment for experiments, tests and analyses; Record measurement data, make calculations and prepare charts; Conduct statistical surveys

     

    2. What is your product research and development idea?

    - Product conception and selection product concept and evaluation product definition and project plan design and development product testing and validation launch to market

    Write your message here and send it to us

    related products

    Our advantages lie in the following trade lanes: