●Programmable Power Limiting and Current Limiting for Complete Safe Operating Area (SOA) Protection
●Wide Operating Range: 9 V to 80 V
●Latched Operation (TPS2490) and Automatic Retry (TPS2491)
●High-Side Drive for Low-RDS(on) External N-channel MOSFET
●Programmable Fault Timer to Protect the MOSFET and Eliminate Nuisance Shutdowns
●Power Good Open-Drain Output for Downstream DC/DC Coordination
●Enable Can Be Used as a Programmable Undervoltage Lockout or Logic Control
●Small, Space-Saving 10-pin VSSOP Package
●Calculator Tool Available (TPS2490/91 Design-in Calculator, SLVC033)
The TPS249x are easy-to-use, positive high voltage, 10-pin Hot Swap Power Manager devicesthat safely drive an external N-channel MOSFET switch. The power limit and current limit (both areadjustable and independent of each other) ensure that the external MOSFET operates inside aselected safe operating area (SOA) under the harshest operating conditions. Applications includeinrush current limiting, electronic circuit breaker protection, controlled load turn-on,interfacing to down-stream DC-to-DC converters, and power feed protection. These devices areavailable in a small, space-saving 10-pin VSSOP package and significantly reduce the number ofexternal devices, saving precious board space. The TPS249x is supported by application notes, anevaluation module, and a design tool.
1. Who are the staff in your R & D department? What are your qualifications?
-R & D Director: formulate the company’s long-term R & D plan and grasp the direction of research and development; Guide and supervise r&d department to implement company r&d strategy and annual R&D plan; Control the progress of product development and adjust the plan; Set up excellent product research and development team, audit and training related technical personnel.
R & D Manager: make new product R & D plan and demonstrate the feasibility of the plan; Supervise and manage the progress and quality of r&d work; Research new product development and propose effective solutions according to customer requirements in different fields
R&d staff: collect and sort out key data; Computer programming; Conducting experiments, tests and analyses; Prepare materials and equipment for experiments, tests and analyses; Record measurement data, make calculations and prepare charts; Conduct statistical surveys
2. What is your product research and development idea?
- Product conception and selection product concept and evaluation product definition and project plan design and development product testing and validation launch to market