Globalization concept

Products

TPS62147RGXR

Short Description:

TPS62147RGXR  3-17V 2.0A Step-Down Converter with 1% accuracy and PFM/Forced-PWM in 2x3QFN


Product Detail

Research

Product Tags

Features for the TPS62147

Output Voltage Accuracy ± 1% over specified TJ range (PWM mode)

Input Voltage Range: 3 V to 17 V

Quiescent Current 18 µA Typical

Output Voltage from 0.8 V to 12 V

Adjustable Soft-Start

Forced PWM or PWM/PFM operation

Switching frequency of 1.25MHz or 2.5 MHz in forced PWM

Precise ENABLE input allows

User-Defined Undervoltage Lockout

Exact Sequencing100%

Duty Cycle Mode

Automatic Efficiency Enhancement AEE™

DCS-Control™ Topology

Active Output Discharge (TPS62148)

HICCUP Overcurrent Protection (TPS62147)

Power Good Output

Available in 2-mm × 3-mm VQFN Package

Description for the TPS62147

The TPS62147 and TPS62148 are high efficiency and easy-to-use synchronous step-downDC/DC converters, based on the DCS-Control™Topology. The wide input voltage range of 3-V to 17-V make them suitable for multi-cell Li-Ion aswell as 12-V intermediate supply rails. The devices provide 2-A continuous output current. Theyautomatically enter Power Save Mode at light loads to maintain high efficiency across the wholeload range. With that, they are well suited for applications that require connected standbyperformance, like industrial PC and video surveillance. With the MODE pin set to low, the switchingfrequency is adapted automatically based on the output current and also on input and outputvoltage. This technique is called Automatic Efficiency Enhancement (AEE™) and maintains highconversion efficiency over the whole operation range. TPS62147, TPS62148 provide a 1% outputvoltage accuracy in PWM mode and therefore enable the design of a power supply with high outputvoltage accuracy. The FSEL pin allows to set a switching frequency in forced PWM mode of 1.25 MHzor 2.5 MHz, respectively.

The typical quiescent current is 18 µA. In shutdown mode the current is typically 1µA.

The devices are available as an adjustable version, packaged in a 3-mm × 2-mm VQFNpackage.


  • Previous:
  • Next:

  • 1. Who are the staff in your R & D department? What are your qualifications?

    -R & D Director: formulate the company’s long-term R & D plan and grasp the direction of research and development; Guide and supervise r&d department to implement company r&d strategy and annual R&D plan; Control the progress of product development and adjust the plan; Set up excellent product research and development team, audit and training related technical personnel.

    R & D Manager: make new product R & D plan and demonstrate the feasibility of the plan; Supervise and manage the progress and quality of r&d work; Research new product development and propose effective solutions according to customer requirements in different fields

    R&d staff: collect and sort out key data; Computer programming; Conducting experiments, tests and analyses; Prepare materials and equipment for experiments, tests and analyses; Record measurement data, make calculations and prepare charts; Conduct statistical surveys

     

    2. What is your product research and development idea?

    - Product conception and selection product concept and evaluation product definition and project plan design and development product testing and validation launch to market

    Write your message here and send it to us

    Our advantages lie in the following trade lanes: